Call Forwarding Usage Instructions

To Forward Your Calls

1. Lift the receiver and listen for the dial tone. Dial “72.”
2. Depress the # button (with a rotary dial, skip this step and wait for a 4-second pause).
3. Again, listen for the dial tone.
4. Now, dial the number where you wish your calls forwarded. (Speed calling codes may be used if you also have this feature.)
5. When someone answers at the forwarded number, call forwarding is put into effect.

If there is no answer, or the line is busy, hang up and repeat the previous steps. If you do this within two minutes, you’ll hear two beeps meaning your Call Forwarding feature is in effect. Once you’ve activated Call Forwarding, the phone will make one short ring each time a call is forwarded. However, you can still make out-going calls from this phone. If you wish to change the number your calls are being transferred to, just discontinue the first (see below), and redirect your calls using the above steps.

To Discontinue Call Forwarding

1. Lift the receiver and listen for the dial tone.
2. Dial “73.”
3. Depress the # button (with a rotary dial, skip this step and wait for 4- second pause).
4. Listen for two beeps. Call forwarding is now discontinued.

To Activate Call Forward Busy:

1. Pick up the handset and listen for the dial tone.
2. Press * 90. On a rotary phone, dial 1190.
3. You will hear a “stutter” tone, then normal dial tone. You may now enter the number you wish your calls to be transferred to when your line is busy. If someone answers at that number, the task is completed. If there is no answer, you must repeat steps 1, 2, and 3 within two minutes.1

To Deactivate Call Forward Busy:

1. Press *91. On a rotary phone dial 1191.

To Activate Call Forward No Answer:

1. Pickup the handset and listen for the dial tone.
2. Press *92. On a rotary phone dial 1192.
3. You will hear a “stutter” tone, then normal dial tone. First enter the number of rings (2-9) desired before the call is to be forwarded.
4. Next, enter the number you wish your calls to be transferred to when your line is busy. If some-one answers at that number, the task is completed. If there is no answer, you must repeat steps 1, 2, and 3 within two minutes.

To Deactivate Call Forward No Answer:

1. Press *93. On a rotary phone, dial 1193.
2. After this step, a confirmation tone (“beep-beep”) signals successful programming.